Details
The ZTE MF10 Router is a basic Wi-Fi to share access to mobile internet from a USB modem between multiple computers. It is supplied with the USB modem ZTE K3765.
ZTE MF10 3G Router features:
* USB to connect the modem
* WiFi 802.11 b/g
* 2 × 100 Mbps Ethernet ports
* Supports up to 5 clients WiFi
By default, the administration interface is available in http://192.168.0.1 with admin username and password.
|
Physical characteristics |
|
|
Size |
93mm X 70mm X 25mm |
|
Indicator LED |
Support four LEDs: Power, WLAN, PPP and WPS |
|
Temperature |
Storage: -20°C ~ +60°C |
|
Operation: -10°C ~ +55°C |
|
|
Button |
Support two buttons: WPS and Reset |
|
MTBF |
>30000H |
|
Power |
|
|
Power Supply |
Primary driven by an AC connection (uses an external adapter) |
|
Input voltage: 100V~240V, 50Hz~60Hz |
|
|
Adapter Spec. |
Rated voltage: 5V DC±10% |
|
Rated current 2A |
|
|
Power Consumption |
ON State: MAX 6.8W |
|
OFF State: MAX 0.5W |
|
|
Interface Port |
|
|
LAN |
RJ45 x 2 (10BaseT/100BaseTX with Auto-MDIX IEEE 802.3) |
|
USB |
High Speed USB 2.0 |
|
Interface (For USB Modem x 1) |
|
|
Main board for routing |
|
|
Soc Processor |
RT3050 |
|
Highly-integrated networking security/application processor |
|
|
300Mbps PHY data rate |
|
|
Support boot from 8/16-bit parallel NOR type Flash |
|
|
Embedded a 7-port Ethernet switch and a 5 shot 10/100Mbps PHY |
|
|
Hardware packet processing acceleration |
|
|
Support 16/32-bit SDR SDRAM |
|
|
SDRAM data 31:16 are pins shared with GPIO |
|
|
Memory |
SDRAM 16MByte |
|
FLASH 8MByte |
|
|
Internal Power |
3.3V 0.9A |
|
1.5V 0.7A |
|
|
1.8V 200mA |
|
|
5V 500mA |
|
Warranty: We offer all our customers full 1-year Warranty against product quality failure.
More newest articles about MF10:
Check items to add to the cart or select all
You have no items in your shopping cart.
You have no items to compare.
